Anonymous
Topics: 27 / Replies: 42
Reply
RE: Should I sand or strip finish and can I put semi-transparent on deck and solid on rails and benches?

Two-toned decks look great. This is how we would approach it. 1. Strip and pressure wash all wood. 2. Let dry and sand the horizontals areas as you me...

7 years ago
Reply
RE: Removing ink stamp from new KDAT SYP boards before staining

See this about ink stamps: and you cannot stain this now. Let it weather and prep:/p>

7 years ago
Reply
RE: Deck Staining Help

Strip off the Thompsons and then brighten the wood. That should remove the mildew.

7 years ago
Reply
RE: Deck Staining Help

1. Minnesota 2. Full sun for most of the day (deck is on east side of home) 3. Cedar 4. Yes, last spring when the snow melted, there was mold/mildew. ...

7 years ago
Reply
RE: Unknown previous finish...help!

If you pressure wash to remove all the stain that is peeling, you should be able to cover with a new coat of solid stain. Just make sure that you do n...

7 years ago
Reply
RE: Applying a Second Cleaning, or Stripping Instead.

You need to strip this and it is not any harder to do than cleaning. Apply stripper and pressure wash off. When done, brighten all the wood the same d...

7 years ago
Reply
RE: Unknown previous finish...help!

RAD’s website said they think i could use their solid stain over this without stripping, but I wasn’t sure.

7 years ago
Reply
RE: Stain Rough Cedar Lap Siding

Try Armstrong Clark in a semi-solid color.

7 years ago
Topic
Replies: 1
Views: 1686
Reply
RE: Unknown previous finish...help!

Post a picture of the current condition.

7 years ago
Topic
Reply
RE: Staining using same brand of stain

Either semi-trans or semi-solid. Semi-solid would give the max UV protection.

7 years ago
Page 150 / 501