Not sure the wood type but it will stain darker than the rest of the cedar. Make sure to prep well first.

Pressure wash first and then spot sand to remove any peeling stain. Cover all intact stain with a new coat of solid stain:

It is a solid color deck stain. Not sure the brand.

It will show through but it will not look bad. Gives the wood character.

You have internal water discoloration. Maybe from sprinklers, etc. This cannot be removed as it is in the wood, not at the surface. Maybe brighten aga...

You cannot get wood to match this color of the deck unless you go with high solids like a solid stain or semi-solid stain. Mountain Cedar by Armstrong...

1. Does not matter. 2. No pictures. Wood type will not matter when trying to color match, it will be the stain and you will have to test colors as i...

Easiest is to replace the wood, but that is also the costliest.

Crown side does not matter so much, but you may not be able to get those joist stains out of the wood. It is deep into the grain.

Probably but best to ask them directly as we do not use their product.

Floor buffer with sanding pad is the easiest way. It will not reduce absorption. You get the pads at the rental yard. They are either white or red.

Humidity does not matter and temps vary based on the brand you are going to use.

It depends if you fence wood is rough sawn or smooth. This article should help explain:/p>

Use TWP 1500 Series in Clear. It will gray naturally.

You cannot apply more than 2 coats and you cannot create a distressed look with deck stains. You also cannot mix different brand and different types o...