Anonymous
Topics: 27 / Replies: 42
Reply
RE: oil stain over acryic finishing.

You would have to power sand to remove the coating if you want to change to a penetrating semi-transparent. It would be easier to go over it with a so...

7 years ago
Topic
Reply
RE: Switching from painted to stained deck

Would you recommend the 100 or 1500 series stain? I live in Massachusetts.

7 years ago
Topic
Reply
RE: Proper steps to do it right

You can use a pressure washer as the rinsing tool as long as you are 8-12 inches away from the wood with the tip. Raising the grain some is good as we...

7 years ago
Reply
RE: LIFETIME wood treatment

** Deteriation not determination . The wood stakes are 2-3 years old and no signs of rotting while spruce wood I stained and used as plant boxes has...

7 years ago
Reply
RE: LIFETIME wood treatment

I've used this product and like it. I put it on a few things in the back yard. One length of fence. The other two were painted with grey stain solid ...

7 years ago
Reply
RE: Proper steps to do it right

Thank you. I guess cleaning the deck will help get the sawdust out of the wood pores as well. Normally when cleaning a deck, you use a stiff brush o...

7 years ago
Reply
Reply
RE: Properly Cleaning a Deck Before Staining

Nothing we know of will remove the sunscreen oil if deep in the wood. Sorry.

7 years ago
Reply
RE: Properly Cleaning a Deck Before Staining

Hello! We are in central Michigan and had a new 300sf cedar KDAT deck built. We are planning on using the Gemini cleaner/brightener and then a TWP sta...

7 years ago
Reply
RE: New Lumber added to deck

New wood is more like 3+ months:/p> Since it is only two boards, just stain them now. You will need to reapply another coat to those two boards next S...

7 years ago
Reply
RE: New Lumber added to deck

In a previous post you mentioned waiting 1-12 months before staining new wood with the aforementioned process. If I need to replace two floor boards n...

7 years ago
Reply
RE: Need advice on what to do next with this deck cleaning / stripping / staining

Pressure wash off what is loose and then you can stain over the rest. Look at one of these brands:/p>

7 years ago
Page 132 / 501