Anonymous
Topics: 27 / Replies: 42
Reply
RE: Mid Project Stain Change?

The only thing that can go over this is a solid stain. Try a two-toned deck. Solid stain for the verticals and semi-transparent for the horizontals. S...

9 years ago
Topic
Replies: 2
Views: 2453
Reply
RE: Won't dry - Behr #4000 Transparent Penetrating Oil Wood Finish Clear Exterior Stain

Thanks for the reply. How long should I wait to decide? At this point, there are no visually heavy areas, it all looks good and not thick, very consis...

9 years ago
Reply
RE: Won't dry - Behr #4000 Transparent Penetrating Oil Wood Finish Clear Exterior Stain

Nothing you can do to speed up or force drying of your over application. Hopefully it dries and cures on its own. If it does not, you will need to rem...

9 years ago
Reply
RE: When to seal and stain new deck, TEXAS

Thank you for your quick reply!! I did read the article prior to sending my questions but it's confusing when it says 1-12 months. I get that it dep...

9 years ago
Reply
RE: When to seal and stain new deck, TEXAS

Yes, you should wait. See this article:

9 years ago
Topic
Reply
RE: Need advice on re-staining

Yes, you need to prep again. Do in the Spring.

9 years ago
Reply
RE: Removing old stain - How do I know when I'm done?

No, you need it all off. Drum sanders are much more efficient.

9 years ago
Reply
RE: Need advice on re-staining

Also, I forgot to ask if I should do it now in the Fall or wait until spring?

9 years ago
Topic
Replies: 3
Views: 1814
Reply
RE: Removing old stain - How do I know when I'm done?

Is the amount of removal in the board closest to the wall in the second picture sufficient for a semi stain? Will a drum roller really do that much be...

9 years ago
Page 209 / 502