@administrator Thank you!!!

@administrator Hello, We stained last week after sanding and stripping, then brightening and the bleaching of the berry stains and 2 days of drying. ...

@administrator thank you Scott! And then stain if it works? Or reapply brightener?

@administrator Just noticing this trim. We actually have 'rough-cut' cedar trim boards and they are used all around the exterior of the house. So...

Hello, What would we notice as a difference between the two stains? It seems after much searching that I could only get it ordered in the needed cust...

@administrator Hello, I didn't realize you had an article of recommended solid stains linked here to your answer. I did already buy a qrt of PPG Ultr...

@administrator Also there is some white film here and there, I know you say thats oxidation but I forget your recommendation, is that okay to eventu...

@administrator Hello Here is RAD Paintstrip on the BEHR transparent stain for 1 hour, covered and misted. It is is the low 80s here and humidity arou...

Okay we will buy the Paintstrip, is 4 gallons right for a 380 sq ft deck? And apply with a roller it says? Then their notes say no brightener needed a...

@administrator <What you have on the wood is more solid/opaque than semi-transparent. Behr lies about their opacity. We would power sand it off a...

@administrator Curious why you are suggesting to apply a solid stain? Thought the semi transparent was better for easier maintenance.

@administrator Re forwarding Hello, We have another 17 yr old pressure treated deck to maintain, it is under a porch canopy so not full sun/faces...

@administrator Thank you. So you would not use the RAD stripper & booster or the stronger Paint Stripper product? Just sand this one? (Is an ...

Hello, We have another 17 yr old pressure treated deck to maintain, it is under a porch canopy so not full sun/faces North, and has 4-yr old semi tran...