Posted by: dawn26 Thank you. any idea on what brand of paint for them? It does not matter for the spindles what brand to use.

I think it would be best to use a paint for the black spindles so it adheres well. Not a solid color deck stain.

You cannot just remove the excess stain. You would have to strip and start over. Might be best to just leave it as is and start over in a year or two.

If using TWP, you will need to remove all of the current stain. If using a solid stain, just pressure wash off the dirt and any loose/peeling stain. T...

As long as it is clean, you should be okay. Apply two coats of the TWP 1500 with a wet on wet application.

Sorry but never used the Rymar.

TWP is not sold wholesale, but retail. Contact manufacturer for a location.

Bite the bullet and sand the rest off the floor, leaving the railings with the solid stain. When done, use a deck cleaner and a wood brightener for th...

Use one of these products: The 5 Best Deck Stain Ratings

See here about new wood: Staining A New Deck See here about Two Toned Decks:/p> Stain white parts with Flood Soldi stains.

Solid stain for both rails and decking? White for the rails? Best to let sit until Fall. Use a pressure washer and deck cleaner for prep. Try Flood So...

The Step 1 will help to remove the white streaks (oxidation) and the Step 2 will hopefully even it out. Leave the Step 2 on for 30 minutes so it reall...

The Step 1 will help to remove the white streaks (oxidation) and the Step 2 will hopefully even it out. Leave the Step 2 on for 30 minutes so it reall...

The Step 1 will help to remove the white streaks (oxidation) and the Step 2 will hopefully even it out. Leave the Step 2 on for 30 minutes so it reall...

Honestly, I do not think it matters as brick pavers drain.