You can stain over this. We would use a solid stain for the trim board.

@administrator Also there is some white film here and there, I know you say thats oxidation but I forget your recommendation, is that okay to eventu...

Yes, the right side looks good. Leaving it on longer will make it easier to remove. Try another section of say about 3 sq feet. Leave one for 3-4 hour...

@administrator Hello Here is RAD Paintstrip on the BEHR transparent stain for 1 hour, covered and misted. It is is the low 80s here and humidity arou...

@fishman57 What exactly was the problem with that one board you felt needed replacing ? Just curious cos the rest of them looked alright to me and aft...

@administrator I've read this post from the beginning. Being a professional painter for many years similar to yourself I've done 100's but not 1000'...

@franz Coverage can vary so at least 4 gallons, maybe more. Make sure to do a test spot to determine how thick to apply and how long to let it dwell. ...

Okay we will buy the Paintstrip, is 4 gallons right for a 380 sq ft deck? And apply with a roller it says? Then their notes say no brightener needed a...

@franz Use a belt sander or rent a drum sander. Orbital sanders leave swirl marks.

@franz For the gray deck you already have a solid stain so the easiest is to reapply our RAD Solid stain in gray after prep.

@administrator <What you have on the wood is more solid/opaque than semi-transparent. Behr lies about their opacity. We would power sand it off a...

@administrator Curious why you are suggesting to apply a solid stain? Thought the semi transparent was better for easier maintenance.

@franz Yes, you could use the RAD PaintStrip first to remove as much as possible (it may remove it all) and then sand the rest if needed. Brighten all...

Been doing this kind of stuff forever and it's actually true that you've never seen it all ! Obviously that product is a disaster in the long term. Be...