Anonymous
Topics: 27 / Replies: 42
Reply
RE: Apply clear sealant over old semi-transparent Behr stain without stripping?

No, you cannot apply a sealer over a deck stain. Try pressure washing and then using a solid color stain over the Behr:/p>

7 years ago
Reply
RE: Apply clear sealant over old semi-transparent Behr stain without stripping?

I would like to add that the look is not very important to me. All I want to do is preserve the deck as long as possible. I don't mind a natural or ...

7 years ago
Reply
RE: Brighteners - need to be the same as cleaner brand?

Dang. I figured that was the answer but I didn't want to hear it. Guess I'll order off the internet and wait. Thanks again for the great informati...

7 years ago
Reply
RE: Brighteners - need to be the same as cleaner brand?

Use the same brand is best as not all the same formulas to balance each other out.

7 years ago
Reply
RE: Stripped and cleaned my deck but am left with darky patchy spots

The darkness is in the wood. Try brightener again and let it dwell for an hour or longer.

7 years ago
Reply
RE: Cleaning/Staining Knotty Cedar Deck/Fencing/Planters Box

You need to strip and pressure wash this. Brighten all wood after. Cleaning alone will not be sufficient. Look at Restore A Deck Stripper/Brightener K...

7 years ago
Reply
RE: Old Cedar and New PT Pine

Try TWP 100 Series or Armstrong Clark Wood Stains. Clean and brighten for prep.

7 years ago
Reply
RE: Old Cedar and New PT Pine

No, I power washed about 2 months ago. My guess it hasn’t been stained in 6+ years Replaced rotten areas. Want to stain it to protect it from further...

7 years ago
Reply
RE: New deck stain removal. Need Help

Use the RAD stain stripper with these two additives:/p> Let dwell for 30-60 minutes and the pressure wash off. Repeat if needed.

7 years ago
Page 143 / 501