If the wood is smooth you need to install, weather and prep. See tips:/p> As for stain, try TWP 200 Series for this. It is designed for shakes a...
You cannot strip a solid stain fully so you will have to power sand or grind it off. Clean and brighten after a full removal.
The top brands are here:/p>
It is not adhering. You will have to sand all affected areas to fix and then recoat. Not sure you did anything wrong. Just not the best stain option.
Restore a Deck stripper would not fix rust. The Restore A Deck Brightener would have. It would be best to age the wood for a few months and then final...
Use the Restore A Deck Stain Stripper: with both additives: Brightener last.
@dbdigital Sorry for the delay. Nothing causes it as the sap is internal and was always there. When you clean you remove a layer of wood cells and t...
Sorry for the delay. Do you have any pics for prep advice?
You will need to remove all and start over. Strip and brighten down to the bare wood.
You will need to pressure wash while suing the RAD Prep. Will that work in your interior areas? The RAD Stain will work better and prevent mildew an...
Yes, you need to wait and prep. See this about new wood:/p>
You have to fully remove the Super Deck first. Post some pics so we can see the best way to do this.
You will need to prep by removing the prior coating first. Use a stain stripper and then a wood brigtener while pressure washing. Stain after with TWP...
The oozing is sap and has nothing to do with age of the wood or the stain. It is normal for a stain not to fade compared to the rest of the deck if co...