Quote from administrator on September 5, 2012, 17:27 I would use a cleaner to prep then do a very light maintenance coat. One coat on then d...

I would use a cleaner to prep then do a very light maintenance coat.

Both are very good stains without one being better then the other. All wood is going to eventually crack. Stains will not prevent this from happening....

Quote from administrator on June 26, 2012, 00:27 Not sure if it can be stripped. Try this site for contractors: Deck Cleaning Contractors North...

If using the Defy Extreme I would wait until Spring.

For this newer deck I would use the Armstrong Clark Stain in the Amber Color.

You can lightly sand the furry wood with a sander. It does happen with stripping or heavy cleaning. If it is not too bad try a scotch bright pad ( the...

I would like to add, read a can of Sikens. It is only good if you seal ALL 6 side of the wood. If not mosture can wook its way up under the sealer. Yo...

Yes i too would wait untill next year, Then clean, lightly sand ,then reseal with TWP . Good Luck Crudbusters

I found Concrete Etch, a RustOleum product made of 100% citric acid. It is available at Home Depot in Canada, so it is most probably available in ...