Strip and brighten all, and for the best UV protection and the most uniform appearance, use the TWP Semi-Solid. See here:/p>

@administrator Thank you!

Clean and brighten all wood for prep and then use a penetrating semi-transparent stain that is similar in color. Only 1 coat.

@administrator Here are some views! I've included a water splash (drops stay partly on the surface for a few moments, are fully absorbed within 20 ...

We would suggest getting it all off. For most of the stain left, we suggest the RAD stripper with both additives. Apply, let dwell for 45 minutes, and...

1. Indiana 2. Large (500 sf+) 2 level deck, one level in full sun, one level in predominantly shade - almost 30 years old, sun deck obviously in wors...

Please post some pics in the forum of the wood.

I am confused about whether I need to, or can, stain my deck, which was rebuilt 4 years ago with a type of lumber product called Elite Decking. Are y...

Newly applied stain is more challenging to remove. Use the RAD stripper with both the Booster and the Gel additives. Apply and let dwell for 30-45 min...

SE MI with one year old tongue and groove Douglas fir porch floor. First single coat of RAD semitransparent in July 2023, and second and third coats...

You are welcome!

Then TWP 100 it is! I ordered some Dark Oak, whereas before I used Cedartone. Thank you for your advice!

Clean and brighten this oxidized wood for prep. 2 Coats of the solid stain.

See this for solid stain recoating tips:/p> You will need 2 coats. Might want to look at the RAD Solid Stain as well.