Never seen a stain damage a rubber roof from drips. I think the AC Amber would work well for this.

Probably best to stick with the Olympic if you do not want to switch. It may not be available anymore though. if you strip than you can switch brands....

You apply a wood brightener right after the stripping is done to neutralize. Let dry for a couple of days is normal but this will vary based on the st...

I'm not sure where to ask this so I hope this is right. How long do you wait between stripping the deck and then brightening it? Then how long do yo...

Great. Thanks for the quick response. Hope you don't mind a couple of extra questions... -I'm assuming then that even though it's oil-based, if...

You need to get it all off if you want your new coating to work at maximum potential. Cleaners will not do anything for this. Continue to sand is your...

These deck covering finishes are basically just thick paints and they peel. Either way you go, the wood does not look very clean. To me it looks like ...

Striping would have better results than sanding them out. I would blend with a dark stain.

TWP 1500 or Armstrong Clark for this. I would brighten the wood and rinse very well to remove sand dust. Read here about Behr from real consumers...