The TDS for the Flood Pro Series Solid Color Stain says: Surface must be dry and clean. Remove all dust, dirt, mildew, oil, loose wood fibers and ot...

In reference to the response given to ProKotebill by Deck Stain Help, are you referring to the Pro Series Solid Color Stain that is acrylic? I did a s...

Yes, you will need tp pressure wash to clean and remove all the loose stain.

Great thanks you so much for the help! Would you recommend a quick power wash over sanding to kick loose what’s left?

You cannot strip a solid stain fully. Just clean off what is loose and stain with a solid stain again

The only way to custom tint is to go to a solid color or semi-solid color. Try the Solid color. It would be the easiest for you. Pressure wash to clea...

I'm having difficulty getting a stain job to last for more than one year. Every spring it peels, particularly in the spaces between boards. The deck...

You should strip off the SW and start over. Stains like twp cannot go over a different brand and adding more SW will make the scenario worse.

I just found your website today, unfortunately. Two weeks ago I stained my deck with S.W. semi-transparent oil based stain and am not completely happ...

A) Solid stains soak into wood railings better than paints. B) Ne wood needs to season for a few months and then cleaned and brightened for prep. Onc...

The easiest would be to clean and recoat with the ATO, but you have to make sure you can actually get the same ATO as before. You may not as they have...

That is still considered new.