If you apply now it will most likely dry unevenly. Do not sand but lightly strip off the remaining and then brighten the deck for the prep.

It it were use we would just lightly rinse the deck down with water and let dry for a few days. You will be fine. I would also check with Sikkens to m...

Atlanta, GA; Full sun, cedar, 6 months old. I just stained the deck after using the cleaning products for new wood. Used TWP 100, cedar tone, yesterda...

Thanks!

Strip off what you can. Sand any peeling areas off. This will prep for another solid stain.

Try Flood Solid Stains

I have the same issue, Behr solid stain that is peeling on the horizontals. I live in West Virginia and the deck is made of pressure treated lumber, ...

What would you suggest then for a deck in West Virginia in full sun made of pressure treated wood that doesn't have a mold or mildew problem? It's ab...

Ok thanks for your help

You may be good to proceed as long as the old stain is not peeling.

If you just cover the Behr it will be easier but it will not fix the problem so it will peel again. Sanding is very hard though to remove a solid stai...

Stay with the oil.

Quote from administrator on May 7, 12:04 Water cleanup and better at mold prevention. My primary goal is longevity. What do you recommend, oil ...