Prep with the Defy Wood Cleaner and the Defy Wood Brightener first. You need both. Stain with the Defy Extreme. You should never use a varnish or simi...

Just bought a house and I need to know what to put on my deck. I have used "Flood" in the past with good luck but only clear coat. My deck now is brow...

Thanks for you post. After reading more thoroughly it does seem I misjudged and that Cutek is more of a traditional penetrating oil based finish and n...

Dear administrator, Peter Bray of CUTEK International here. I would just like to reference the customer post and reply from your company if I may...

If it was us we would strip off what will come off and re stain with a solid stain. Might need to sand a few areas. Get a solid stain that matches the...

To remove mill galze you should use a deck cleaner and wood brightener. TWP wants new wood to season for 4+ months after install before staining. You ...

the wood is smooth. It's a (1 1/4 x 5 1/2 x 8 feet long). Ibought that in home depot. It's a deck board . I think the wood is dry enought but i don't ...

No wood filler will work on outside wood or will blend with a semi-transparent decking stain. Use a penetrating oil based stain like TWP or Armstrong ...

Since most is vertical we suggest the Defy extreme for this. It will penetrate well and give maximum protection from mildew growth.

Fence wood is usually rough sawn and does not need to be sanded for prep. Is your wood smooth or rough?