I live in Pigeon Forge, Tn. have a 40 deck, and most of it is in direct sun. 2008 put on Behr semi transparent deck stain. To date some of the ...
TWP-1511 rate it 9.99 so far Awesome product...just tore off the planking of my 600 square foot deck. Built it twenty years ago and never found a s...
I would not do the underside unless it really bothers you as it can be difficult to apply. For the stain, you would want a deep penetrating stain that...
Just had a new deck installed - pressure treated pine. It's large - 14' x 32', 15 steps and a landing - the rail balusters are Deckorators, but there...
60 grit or less. Be careful of swirl marks with orbital sanders.
I would look at the Armstrong Clark in the Semi-Solid Mountain Cedar color. I think it would blend and look great on this deck. We would love to ...
Forgot to mention.. The Behr stain was a taupe colour latex. I see the A/Clark dos not make a solid stain, so what stain would you recommend that will...
Thanks for the info. I think I am going to have to sand. Any suggestions as to what grit sandpaper with an orbital sander?
Either would work well. Eventually the 100 series will be removed when the government changes the VOC limits nationally. We like Chapin pump spra...
I would just rinse with water. You can spray the TWP with a pump sprayer and back wipe drips and to ensure an even application.
I do not think you need to sand again. If you do then stop at 60 grit. You will need to clean and brighten the wood while lightly pressure washing whe...
If you just have a small amount left then it is possible to blend it by using a similar color. If it is a decent amount, then I would sand and lightly...