Looks great!

Hello! I just thought I'd follow up in the event someone else has this problem. I cannot remember the results of the water test now, however. We end...

Great to hear. Thanks again for all your help and advice. TWP has worked out very well for us and a neighbor so far. No wearing off,darkening or mold...

This is what you should do: 1. Sand off the ink stamps with a palm sander suing 80 grit 2. After sanding, let the wood site for 1-3 months. You...

Much easier to get a rotary buffer and use sanding pads. If you use paper, use 60-80 grit. You do not have to remove all the fuzzies as they will dark...

It should be fine.

Thanks for the reply. It was reassuring. We had successfully used Behrs all in one cleaner and brightener which has oxalic acid to neutralize after we...

I repeated the cleaner and brightener, pressure washing in between, and I was able to get the gray off, though the mold mostly just lightened. (The pr...

Try dish soap and warm water. Use a very soft bristle brush to wash with.