You may be able to touch up the spots that are failing using the same stain, but it will eventually flake off. Acrylic stains are not easy to remove o...

Quote from left base on September 27, 2013, 04:17 So, here's a quick recap of the project: /blockquote> Good work. Welcome to the Behr veteran'...

Ok here it is. I forgot to take a picture after the sanding, but it was about 98% clean. So the full protocol is as follows 1. Strip wit...

Ok, I sanded the deck, quite an operation but the sander took the Behr off much faster and more evenly than any of the strippers, though having stripp...

I located some Defy stain at a lumber yard, so I'm switching to that, as it is quick drying and the color matches somewhat. The issue is going to b...

Here is the current status of my Behr stain removal project after three treatments with HD-80 and about 16 hours of pressure washing with a 2700 psi w...

Thanks. A followup question. The site recommends armstrong clark semi-solid to cover a Behr stained deck, however the closest color seems to be 'Mount...

Ok, me again. Ignore the pressure washer question. I just bought a homelight 2700 psi 4-cycle washer from home depot, that should work. I'm still wond...