ok, thanks.

Again thanks for the advice, I think :) I was starting to conclude the same thing. New plan is to use floor sander with 80 grit to get the top layer...

This will be a problem. Stain strippers will have issues removing the stain in this picture. At this point the multiple coats are basically filming on...

I would wait 1-2 months then lightly clean and brighten the deck. TimberOil Brand is the way to go for brand new wood. It will penetrate better. You c...

Thanks for the tip. One last question. Should I apply the RAD product with a power washer via injecting or deck pump spray it then power wash? I am...

After cleaning it is normal to let the wood dry for 48 hours. This varies though depending on the brand of stain you choose.

I cannot tell from the picture what the old stain is. It looks like the RAD stripper should be able to remove the majority of it. I would strip as muc...

TWP Stains are applied "wet on wet". This means that the first coat is applied then you reapply the 2nd coat right away. Typically you only need to do...

It would be best to strip down all the older sections and then brighten them. This will get it close in color but it is impossible to get older wood t...

One more question. How long should I wait between cleaning and staining?

I have 3 situations on my all cedar deck. Part of it is covered and gets no sun or rain etc, one part is not covered and gets full sun and rain, the l...

it's so new that it isn't even assembled yet. Decking should be up by this weekend.