You cannot add more stain on top to "blend" a color. You also will have issued with applying more stain as it may not penetrate and or dry correctly. ...

Clears will not give UV protection. You must have a color or stain. In addition lighter tints will fail faster then darker tints. You could try the TW...

Sounds like you did not prep correctly. Did you remove all of the old coatings? Did you brighten the wood?

Also, it looks more orange than the picture indicates. Probably the reason I am having a problem since I made decisions based on photos.

You should not apply another brand on top of an old stain without stripping. Does not matter if it is oil or water based. Neither will work well as th...

Quote from administrator on December 29, 2011, 11:58 When asking questions on Deck Staining please include: <ul>1. I live in Pennsylvania ...

Looks good! I would do a light maintenance coat on the horizontals in 18-36 months or as needed. Redo all in 3-4 years.

Quote from left base on September 27, 2013, 04:17 So, here's a quick recap of the project: /blockquote> Good work. Welcome to the Behr veteran'...

Ok here it is. I forgot to take a picture after the sanding, but it was about 98% clean. So the full protocol is as follows 1. Strip wit...

Can you post a final picture?

Can you post a picture?

Ok, I sanded the deck, quite an operation but the sander took the Behr off much faster and more evenly than any of the strippers, though having stripp...