The prep kit with pressure washing should remove the chalk lines.

Wait a few days and see. If it stays milky, you may need to remove and start over.

2 coats wet on wet unless using on new wood that is 4-12 months old. Only one coat is what they suggest.

Another quick question... If I use the TWP 1500, do you recommend 1 coat, or the wet on wet 2nd coat?

Thanks... 😥

Might want to find a better stain and contractor. It needs to be removed. Adding more of the same will just make it worse.

I'm in Portland, OR. and the contractors I have met with say that sanding would not work...Sherwin Williams rep says to power wash and slap another co...

The only way to remove this SW product is to sand it off or replace the wood.

1. Yes 2. Not sure what brands of stripper are sold in Alaska that work well. 3. New CWF is average at best if oil based. Water-based version is not s...

We would apply 2 light coats now wet on wet. Back wipe any stain that does not soak in within 30-45 minutes.

I picked up this tool at Lowes and it worked great to take off the Rustoleum 10X