State: Colorado (8,500' altitude, eastern side of the Rockies) Deck materials: Pressure treated pine no mildew problems 1/4 of deck get...

My 15 yr old redwood decks have had Penofin Clear applications. In between applications, I've cleaned with TSP powder and water. This year I power was...

I have never seen a stain that matches that color. New wood and old wood will not match either when stained. Best would be to remove the old stain 100...

The AC would match the best and is what we would try.

You should always use a cleaner when washing a deck. Less potential damage for the pressure washer.

Also, I was wondering what I should expect when I stain new/old wood right next to each other. Will I get a striping effect on the addition where they...

is there anything close? I can live with close. Also, when I tested the TWP on a couple pieces of wood, it soaked into the new wood very nicely, givin...

I live in the Twin Cities, MN. I have a cedar deck which faces east so its mostly in full sun. I have no mold or mildew issues. I've already stripped ...

That is correct.

I do not think that the chemicals in a stripper will effect the rubber.

I would look for the Armstrong Clark. You can stain before install.

You cannot strip a solid stain so you will need to clean and reapply a solid stain unless you want to sand the entire deck. We like the Flood solid st...