Yes we may have to spend many days in the recovery process. What are your thoughts on using a paint stripper ?

Thanks. That insight is helpful. It may be worthwhile to post any update here in the future regarding any other observations you end up having on t...

Hi! I hope this is the right thread to get some expert advice! I live in northern BC, Canada and just bought a house with an older pressure treated ...

If the wood is clean and has not discolored from the UV than go ahead and stain! We would love seeing before and after pictures!

Sanding it all off does not sound fun but that really is your only choice. Since it will be in pieces you can probably plane it is well. Once off use...

It seems to apply okay for an acrylic but honestly we have not been back to view it so cannot say what it looks like currently. It has potential to pe...

Hi I have this same issue except I stripped, brightened, then sanded our 15+ yr 17 x 14 deck 4-5 weeks ago in SE PA. We didn't brighten it again...

Ok, thanks. Do you have any initial opinions on Wood Rx as a product based on your actual use so far?... Particularly regarding wearability and dur...

We have not tested/reviewed the Wood Rx as of yet but have used it. In our experience the Defy extreme will penetrate better which means less chance o...

If you sand you should lightly pressure wash after to remove the sand dust, let dry for 24-48 hours, stain when dry. Sanding does not open the wood gr...