Cracks are normal on all exterior wood. To minimize this you can use a product like IPE Oil End Seal. The one large crack on the step does look excess...
No need to pressure wash before. Apply then pressure wash off.
You can strip off a newly applied sealer but it may take a few attempts to remove all as it can be difficult. Strip until it comes off. Make sure to u...
At this point you will need to remove the old coating(s) and start over. It will remove the mold as well. Prep with a deck stain stripper and pressure...
Use a semi-transparent stain. Clear will not help with UV protection and graying prevention. Try TWP or Armstrong Clark.
Quote from rapunzel6506 on January 7, 07:35 Thank you for your answer. I kind of thought so but was hoping otherwise. I was also hoping you could...
The only thing you can do is remove all and start over. It is not penetrating into the wood and is not curing/drying properly. Basically you have too ...
Defy Extreme or TWP 100 Series.
Without knowing what the stain brand is and the chemical makeup of it, there is no way to answer this. I personally would not worry about it as long a...
Sorry for the delay. We have had a few issues with the website. The deck does not look normal and I am not sure what the cause. Have you contacted AC ...
Only thing you can do is remove it fully. Sanding or stripping will be needed.
1. They are very similar but not the same. Both work well. 2. Yes we would use the TWP 1500 over the Messmers UV plus. Both are penetrating oil base...
Quote from lloko on November 18, 02:55 Thank you. Alternatively, could we hold off he second round of brightening and the staining for another 10...
Mix another batch of brightener and apply it with a pump sprayer to all of the wood. Make sure it i all saturated. Wait 20-30 minutes then lightly rin...