Would I need to use the brightener since my IPE deck is only about 5 months old? I spoke with a representative from Armstrong Clark and he menti...

Ok I got the corn cob media blaster. What would be a good oil base natural stain? I was thinking of staining my house with TWP1500 clear. What that b...

I am reluctant to think a penetrating stain will matter or not. The acid from the seeds will eat through it. If you want to try, then look at Armstron...

Quote from administrator on March 25, 21:20 I doubt any stain will resist the seeds if they are that acidic. FYI, stripping a solid stain off and go...

I doubt any stain will resist the seeds if they are that acidic. FYI, stripping a solid stain off and going transparent is nearly impossible to do. St...

Strippers, cleaners, and or pressure washing will not remove a polyurethane. To remove you will need to use a media blasting type system. Look at corn...

Here is a picture of my wood log house. Thanks

I used a polyurethane on my wood log siding. After 2 years, the brand name of ZAR Clear Polyurethane is now blistering off. What should i use to remov...

Hello, all of your questions can be answered on this link:

Prepping with the RAD kits is the best way. Pressure washing while doing this will make it easier. No need to just stain the end grain. Stain all the ...

I asked the builder yesterday and he said he does seal end grains after cutting. Does the sealant wear off over 3 months? When I touched the end grain...