It looks opaque solid stain, not semi. You probably need to pressure wash off the loose stain and then recoat with a solid stain:

No, you cannot add more and you should not have used the RS without removing the prior stain. You will need to strip off the RS and then go with a sol...

Atlanta, GA Mostly shade. We pressure washed and sanded our deck. Applied An oil based stain (Ready Seal)over it.Left an oily film that was not drying...

Clear will gray naturally in months. The lightest tint with UV protection is Honeytone. TWP fades, does not darken.

I have an old redwood deck, now stripped to raw wood. It gets a ton of sun. Have stained previously with Penofin Cedar but with successive coats over ...

Strip and brighten for the prep and try the Defy Hardwood Stain or Restore A Deck Stains.

I also have two porches under roof that have Cumaru wood surface. I applied IPE oil last year and they looked good for about 3 months. They now have ...

@administrator Thanks, Which product will hold up better in hot humid conditions?

Either base is fine. Try one of these stains:

I will treat with Restore-A-Deck Brightener before applying stain

Post a picture.

Yes, correct.

So, am I to just Re-stain over it? No need to use a deck brightener, I take it?