The TWP 100 series.

We actually did run out of Jomax, but since it's locally available will give it a shot. It seems pretty strong as I can't use it without a respirator!...

You will have difficulty stripping this newly applied Behr no matter the stripper brand. Try theJomax and see if that works. If not, switch to the RAD...

Thanks so much for your reply! After reading in your forum, I'm afraid I got the sequence out of order and sanded AFTER brightening. We used Jomax s...

It is not easy to remove the Behr as it applies like a paint and films on top of the wood. Even more difficult to strip when just applied. You may nee...

It will not harm the stain durability, but it will may show through some. Does not matter if semi-trans or semi-solid.

If I can't remove the oxidized wood fibers, can I stain over the fibers without affecting the durability/bond of the stain to the wood? Will a semi t...

Try to stain within 2 weeks of prep. As to heat, some stains can be applied in the heat/sun while others cannot. Without knowing what brand you are us...

That is oxidized wood fibers that did not get fully removed. Try to rewash again with water only getting slightly closer to the wood. Other option is ...

I stripped the stain from a 17 year old pressured treated deck with Benjamin Moore stripper. Now there is a a white residue on the boards. Does the r...

<ul>1. State you live in: Illinois</ul> <ul>2. Full Shade, Partial Shade, or Full Sun: Full afternoon sun</ul> <ul>3. Type of...

Use treated, dry for s few months, then stain.

Can I buy a piece of untreated wood and stain it right away with the same stuff the company used? Or should I buy a piece of treated wood, let the hea...