Yes, the Behr is just a poor product. As contractors for many years, we cannot say anything good about the Behr deck stains especially when it comes t...

Thank you Deck Stain Help. Question answered! Your recommendation is what I was leaning to. Good to get your take on it. Btw, your description of B...

Behr is a filming stain, similar to a solid stain in that it films and dries on top of the wood. That is why it can be so difficult to remove. We typi...

1. You do not need to sand for prep. Clean and brighten. 2. It should not harm the bricks or concrete but best to ask them. Cover plants.

Thanks. 2 followup questions: 1. If I sand how long do I need to wait before going through the process? What are the factors that determine that tim...

Treat the walls like new wood:/p> Sikkens (PPG now) used to be great until they sold the company and changed the formulas. We never use it.

You will have to sand or grind it all off to fix it. No other way besides full removal.

I used Behr Premium Plus Solis coverage with sealer. I waited 2 days between coats. I used 2 coats. It has been 4 days and the deck still feels sticky...

Thanks for this thorough site! I have eucalyptus retaining walls, and was wondering if the products/ procedure should be different. I have it in 2 ...

Strip and brighten for prep and buff off the fuzzies if needed.

@administrators After looking at the pictures you have answered my question about what is wrong with my deck. It is about 14 months old with treated ...

You should not do this. Just sand and then clean and brightener. Do not use the stripper and trying to overpressure wash to match would just waste you...

So I don’t have the deck cleaner but I do have the deck stripper. I plan on power washing it all the same aggressiveness, then sanding it all, applyin...

1. At this point we would just sand it all evenly and remove all previous coatings. 2./p> 3. Clean and brighener whenever you are done with sandin...