@administrator Hello, I didn't realize you had an article of recommended solid stains linked here to your answer. I did already buy a qrt of PPG Ultr...

You can stain over this. We would use a solid stain for the trim board.

@administrator Also there is some white film here and there, I know you say thats oxidation but I forget your recommendation, is that okay to eventu...

Yes, the right side looks good. Leaving it on longer will make it easier to remove. Try another section of say about 3 sq feet. Leave one for 3-4 hour...

@administrator Hello Here is RAD Paintstrip on the BEHR transparent stain for 1 hour, covered and misted. It is is the low 80s here and humidity arou...

@fishman57 What exactly was the problem with that one board you felt needed replacing ? Just curious cos the rest of them looked alright to me and aft...

@administrator I've read this post from the beginning. Being a professional painter for many years similar to yourself I've done 100's but not 1000'...

@franz Coverage can vary so at least 4 gallons, maybe more. Make sure to do a test spot to determine how thick to apply and how long to let it dwell. ...

Okay we will buy the Paintstrip, is 4 gallons right for a 380 sq ft deck? And apply with a roller it says? Then their notes say no brightener needed a...

@franz Use a belt sander or rent a drum sander. Orbital sanders leave swirl marks.

@franz For the gray deck you already have a solid stain so the easiest is to reapply our RAD Solid stain in gray after prep.

@administrator <What you have on the wood is more solid/opaque than semi-transparent. Behr lies about their opacity. We would power sand it off a...

@administrator Curious why you are suggesting to apply a solid stain? Thought the semi transparent was better for easier maintenance.