1. Probably not. 2. Either would work well. 3. You can apply over it after proper prep.

Thanks again, for all your time and expertise.

You still need a stain, not a clear coat. We would suggest getting a few samples to test out so you can find what you are looking for.

Thank you again! Will do. But next year, should I just sand and apply a clear coating (TWP?) to match what I have in photo #2? No UV protection nee...

Yes, you can stay with what you have. Switch next year if you want. We would not bother sanding.

I guess I should add one thing: The deck has a northern exposure, and only end-of-day light on about 15% of it. So if this means I could do without ...

Ok, so if you were me, would you just bite the bullet and stick with the Cetol SRD Teak I bought? If so, should I continue sanding more than I have (...

Clear coatings will not enhance or change the appearance and will not provide UV Protection.

The CWF will need to come off by stripping and sanding. I would do that now. Let all new and old wood weather for a few months and then clean and brig...

5-gallons should work.

See this about KDAT:/p> You can use the TWP after 1-2 months and prep.

Thank you so much for this. Not what I was hoping to hear, but the facts are the facts. Would a strictly transparent/natural coating with no color in...

1. Yes 2. Yes. 3. Yes, pressure wash. 4. You can stain in the sun. 5. It can not rain when applying the stain or be wet when applying. 6. 2 coats wet ...

You cannot make this wood type a light brown. Dark brown, yes. Cedar colors will be orange.