Anonymous
Topics: 26 / Replies: 41
Reply
New IPE Deck staining help

Cracks are normal on all exterior wood. To minimize this you can use a product like IPE Oil End Seal. The one large crack on the step does look excess...

10 years ago
Reply
New IPE Deck staining help

Now the weather is nicer I was able to prep for staining the deck, then i notice these hair line cracks near on the end of ipe boards for my stairs. I...

10 years ago
Reply
Deck Stripping (with RAD) & brightening

No need to pressure wash before. Apply then pressure wash off.

10 years ago
Reply
Deck Stripping (with RAD) & brightening

Do I need to pressure wash before using the RAD? I'm removing some old TWP 100? Thanks.

10 years ago
Reply
Can you strip a clear sealer?

Thank you for your quick reply! We are actually fine with the graying color, so will keep those recommended sealers in mind once we get the horr...

10 years ago
Reply
Can you strip a clear sealer?

You can strip off a newly applied sealer but it may take a few attempts to remove all as it can be difficult. Strip until it comes off. Make sure to u...

10 years ago
Topic
Reply
Help with new cypress deck

At this point you will need to remove the old coating(s) and start over. It will remove the mold as well. Prep with a deck stain stripper and pressure...

10 years ago
Topic
Replies: 1
Views: 2198
Reply
Preserva Wood Stain and Sealer

Use a semi-transparent stain. Clear will not help with UV protection and graying prevention. Try TWP or Armstrong Clark.

10 years ago
Reply
Preserva Wood Stain and Sealer

What would you recommend for a brand new untreated redwood fence - to seal with a stain? Would like to enhance the look of the wood or keep it the sam...

10 years ago
Reply
Olympic Elite Issues

Quote from rapunzel6506 on January 7, 07:35 Thank you for your answer. I kind of thought so but was hoping otherwise. I was also hoping you could...

10 years ago
Reply
Olympic Elite Issues

Thank you for your answer. I kind of thought so but was hoping otherwise. I was also hoping you could answer my question about the porosity of newl...

10 years ago
Page 279 / 500