In a previous post you mentioned waiting 1-12 months before staining new wood with the aforementioned process. If I need to replace two floor boards n...
Pressure wash off what is loose and then you can stain over the rest. Look at one of these brands:/p>
Sir, you are right! It is Solid and I'm recoating with Solid. Thank you for the correction. It's also called SuperDeck, NOT DeckScape. I'll try to e...
You will not be able to strip this fully as what you have is not semi-transparent but solid color/opaque in appearance. They sold you an incorrect pro...
Doesn't matter what the chemical was used to pressure treat the wood, you cannot stain new wood right away as the stain will not soak in correctly and...
Best to use a deck cleaner and then a wood brightener after the sanding, Thie will open the pores of the wood and help to remove the gray from between...
More is not better. Leave alone and apply another coat int the Spring of next year.
We applied one coat of Armstrong Clark semi-transparent oil on kiln-dried premium stain ready wood. However, it looks like it might benefit from anoth...
Vert hard to remove Behr, especially when brand new. In the contractors defense, Behr is a terrible stain to apply. Strip off what you can and then po...
Any roller should work.
1. Live in GA 2. Morning shade, afternoon full sun 3. Pressure treated wood from Home Depot 4. No mold issues. Brand new deck built in May. 5. Hired ...
Thank you so much. Is there a particular roller type that is best for applying a solid stain?